菲律宾 · 第 72· 491 条目
§72钢铁
本章品目（4 位 WCO 统一）
29 个品目
7201生铁及镜铁，块、锭或其他初级形状→7202铁合金→7203直接还原铁、其他海绵状黑色金属及高纯铁→7204黑色金属废碎料；钢铁再熔废碎料锭→7205生铁、镜铁、钢铁颗粒及粉末→7206钢铁及非合金钢锭或其他初级形状→7207钢铁或非合金钢半制品→7208宽度≥600毫米的钢铁或非合金钢热轧扁平材，未包、镀或涂层→7209宽度≥600毫米的钢铁或非合金钢冷轧扁平材，未包、镀或涂层→7210宽度≥600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7211宽度<600毫米的钢铁或非合金钢扁平材，未包、镀或涂层→7212宽度<600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7213钢铁或非合金钢热轧不规则盘卷盘条→7214钢铁或非合金钢其他条、杆，经锻、热轧、热拉或热挤压，或轧后扭曲→7215钢铁或非合金钢其他条、杆→7216钢铁或非合金钢型钢→7217钢铁或非合金钢丝→7218不锈钢锭、其他初级形状及半制品→7219不锈钢平板轧材，宽度≥600毫米→7220不锈钢平板轧材，宽度<600毫米→7221不锈钢热轧不规则盘卷的条、杆→7222其他不锈钢条、杆；不锈钢角材、型材及异型材→7223不锈钢丝→7224其他合金钢锭、其他初级形状及半制品→7225其他合金钢平板轧材，宽度≥600毫米→7226其他合金钢平板轧材，宽度<600毫米→7227其他合金钢热轧不规则盘卷的条、杆→7228其他合金钢条、杆、型材及空心钻杆→7229其他合金钢丝→
菲律宾 全部税号
| HS 编码 | 商品描述 | 首要税率 | |
|---|---|---|---|
| 72.01 | Pig iron and, spiegeleisen in pigs, blocks or other primary forms. | — | → |
| 72.02 | Ferro-alloys. | — | → |
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms. | — | → |
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. | — | → |
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel. | — | → |
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). | — | → |
| 72.07 | Semi-finished products of iron or non-alloy steel. | — | → |
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. | — | → |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. | — | → |
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. | — | → |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. | — | → |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. | — | → |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. | — | → |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. | — | → |
| 72.15 | Other bars and rods of iron or non-alloy steel. | — | → |
| 72.16 | Angles, shapes and sections of iron or non-alloy steel. | — | → |
| 72.17 | Wire of iron or non-alloy steel. | — | → |
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. | — | → |
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more. | — | → |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm. | — | → |
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. | — | → |
| 72.23 | Wire of stainless steel. | — | → |
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. | — | → |
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. | — | → |
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. | — | → |
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. | — | → |
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. | — | → |
| 72.29 | Wire of other alloy steel. | — | → |
| 7201.10.00 | - Non-alloy pig iron containing by weight 0.5 % or less of phosphorus | — | → |
| 7201.20.00 | - Non-alloy pig iron containing by weight more than 0.5 % of phosphorus | — | → |
| 7201.50.00 | - Alloy pig iron; spiegeleisen | — | → |
| 7202.11.00 | - - Containing by weight more than 2 % of carbon | — | → |
| 7202.19.00 | - - Other | — | → |
| 7202.21.00 | - - Containing by weight more than 55 % of silicon | — | → |
| 7202.29.00 | - - Other | — | → |
| 7202.30.00 | - Ferro-silico-manganese | — | → |
| 7202.41.00 | - - Containing by weight more than 4 % of carbon | — | → |
| 7202.49.00 | - - Other | — | → |
| 7202.50.00 | - Ferro-silico-chromium | — | → |
| 7202.60.00 | - Ferro-nickel | — | → |
| 7202.70.00 | - Ferro-molybdenum | — | → |
| 7202.80.00 | - Ferro-tungsten and ferro-silico-tungsten | — | → |
| 7202.91.00 | - - Ferro-titanium and ferro-silico-titanium | — | → |
| 7202.92.00 | - - Ferro-vanadium | — | → |
| 7202.93.00 | - - Ferro-niobium | — | → |
| 7202.99.00 | - - Other | — | → |
| 7203.10.00 | - Ferrous products obtained by direct reduction of iron ore | — | → |
| 7203.90.00 | - Other | — | → |
| 7204.10.00 | - Waste and scrap of cast iron | — | → |
| 7204.21.00 | - - Of stainless steel | — | → |
| 7204.29.00 | - - Other | — | → |
| 7204.30.00 | - Waste and scrap of tinned iron or steel | — | → |
| 7204.41.00 | - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | — | → |
| 7204.49.00 | - - Other | — | → |
| 7204.50.00 | - Remelting scrap ingots | — | → |
| 7205.10.00 | - Granules | — | → |
| 7205.21.00 | - - Of alloy steel | — | → |
| 7205.29.00 | - - Other | — | → |
| 7206.10 | - Ingots : | — | → |
| 7206.10.10 | - - Containing by weight more than 0.6 % of carbon | — | → |
| 7206.10.90 | - - Other | — | → |
| 7206.90.00 | - Other | — | → |
| 7207.11.00 | - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | — | → |
| 7207.12 | - - Other, of rectangular (other than square) cross-section : | — | → |
| 7207.12.10 | - - - Slabs | — | → |
| 7207.12.90 | - - - Other | — | → |
| 7207.19.00 | - - Other | — | → |
| 7207.20 | - Containing by weight 0.25 % or more of carbon : | — | → |
| 7207.20.10 | - - - Slabs | — | → |
| 7207.20.21 | - - - - Blocks roughly shaped by forging; sheet bars | — | → |
| 7207.20.29 | - - - - Other | — | → |
| 7207.20.91 | - - - Slabs | — | → |
| 7207.20.92 | - - - - Blocks roughly shaped by forging; sheet bars | — | → |
| 7207.20.99 | - - - - Other | — | → |
| 7208.10.00 | - In coils, not further worked than hot-rolled, with patterns in relief | — | → |
| 7208.25.00 | - - Of a thickness of 4.75 mm or more | — | → |
| 7208.26.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7208.27 | - - Of a thickness of less than 3 mm : | — | → |
| 7208.27.11 | - - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7208.27.19 | - - - - Other | — | → |
| 7208.27.91 | - - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7208.27.99 | - - - - Other | — | → |
| 7208.36.00 | - - Of a thickness exceeding 10 mm | — | → |
| 7208.37.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | → |
| 7208.38.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7208.39 | - - Of a thickness of less than 3 mm : | — | → |
| 7208.39.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | — | → |
| 7208.39.20 | - - - Containing by weight less than 0.6 % of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm | — | → |
| 7208.39.30 | - - - Containing by weight 0.6 % or more of carbon and of a thickness not exceeding 1.5 mm | — | → |
| 7208.39.40 | - - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm | — | → |
| 7208.39.90 | - - - Other | — | → |
| 7208.40.00 | - Not in coils, not further worked than hot-rolled, with patterns in relief | — | → |
| 7208.51.00 | - - Of a thickness exceeding 10 mm | — | → |
| 7208.52.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | → |
| 7208.53.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7208.54 | - - Of a thickness of less than 3 mm : | — | → |
| 7208.54.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | — | → |
| 7208.54.90 | - - - Other | — | → |
| 7208.90 | - Other : | — | → |
| 7208.90.10 | - - Corrugated | — | → |
| 7208.90.20 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | — | → |
| 7208.90.90 | - - Other | — | → |
| 7209.15.00 | - - Of a thickness of 3 mm or more | — | → |
| 7209.16 | - - Of a thickness exceeding 1 mm but less than 3 mm : | — | → |
| 7209.16.10 | - - - Of a width not exceeding 1,250 mm | — | → |
| 7209.16.90 | - - - Other | — | → |
| 7209.17 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm : | — | → |
| 7209.17.10 | - - - Of a width not exceeding 1,250 mm | — | → |
| 7209.17.90 | - - - Other | — | → |
| 7209.18 | - - Of a thickness of less than 0.5 mm : | — | → |
| 7209.18.10 | - - - Tin-mill blackplate | — | → |
| 7209.18.91 | - - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | — | → |
| 7209.18.99 | - - - - Other | — | → |
| 7209.25.00 | - - Of a thickness of 3 mm or more | — | → |
| 7209.26 | - - Of a thickness exceeding 1 mm but less than 3 mm : | — | → |
| 7209.26.10 | - - - Of a width not exceeding 1,250 mm | — | → |
| 7209.26.90 | - - - Other | — | → |
| 7209.27 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm : | — | → |
| 7209.27.10 | - - - Of a width not exceeding 1,250 mm | — | → |
| 7209.27.90 | - - - Other | — | → |
| 7209.28 | - - Of a thickness of less than 0.5 mm : | — | → |
| 7209.28.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | — | → |
| 7209.28.90 | - - - Other | — | → |
| 7209.90 | - Other : | — | → |
| 7209.90.10 | - - Corrugated | — | → |
| 7209.90.90 | - - Other | — | → |
| 7210.11 | - - Of a thickness of 0.5 mm or more : | — | → |
| 7210.11.10 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7210.11.90 | - - - Other | — | → |
| 7210.12 | - - Of a thickness of less than 0.5 mm : | — | → |
| 7210.12.10 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7210.12.90 | - - - Other | — | → |
| 7210.20 | - Plated or coated with lead, including terne-plate : | — | → |
| 7210.20.10 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | — | → |
| 7210.20.90 | - - Other | — | → |
| 7210.30 | - Electrolytically plated or coated with zinc : | — | → |
| 7210.30.11 | - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.30.12 | - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | — | → |
| 7210.30.19 | - - - Other | — | → |
| 7210.30.91 | - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.30.99 | - - - Other | — | → |
| 7210.41 | - - Corrugated : | — | → |
| 7210.41.11 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.41.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | — | → |
| 7210.41.19 | - - - - Other | — | → |
| 7210.41.91 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.41.99 | - - - - Other | — | → |
| 7210.49 | - - Other : | — | → |
| 7210.49.11 | - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04 % of carbon and of a thickness not exceeding 1.2 mm | — | → |
| 7210.49.14 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm | — | → |
| 7210.49.15 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | — | → |
| 7210.49.16 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm | — | → |
| 7210.49.17 | - - - - Other, of a thickness not exceeding 1.2 mm | — | → |
| 7210.49.18 | - - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | — | → |
| 7210.49.19 | - - - - Other | — | → |
| 7210.49.91 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.49.99 | - - - - Other | — | → |
| 7210.50.00 | - Plated or coated with chromium oxides or with chromium and chromium oxides | — | → |
| 7210.61 | - - Plated or coated with aluminium-zinc alloys : | — | → |
| 7210.61.11 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.61.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | — | → |
| 7210.61.19 | - - - - Other | — | → |
| 7210.61.91 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.61.92 | - - - - Other, corrugated | — | → |
| 7210.61.99 | - - - - Other | — | → |
| 7210.69 | - - Other : | — | → |
| 7210.69.11 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.69.19 | - - - - Other | — | → |
| 7210.69.91 | - - - - Of a thickness not exceeding 1.2 mm | — | → |
| 7210.69.99 | - - - - Other | — | → |
| 7210.70 | - Painted, varnished or coated with plastics : | — | → |
| 7210.70.12 | - - - Painted after coating with zinc | — | → |
| 7210.70.13 | - - - Painted after coating with aluminium-zinc alloys | — | → |
| 7210.70.19 | - - - Other | — | → |
| 7210.70.21 | - - - Painted | — | → |
| 7210.70.29 | - - - Other | — | → |
| 7210.70.91 | - - - Painted | — | → |
| 7210.70.99 | - - - Other | — | → |
| 7210.90 | - Other : | — | → |
| 7210.90.10 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | — | → |
| 7210.90.90 | - - Other | — | → |
| 7211.13 | - - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief : | — | → |
| 7211.13.12 | - - - - Corrugated | — | → |
| 7211.13.13 | - - - - Hoop and strip | — | → |
| 7211.13.14 | - - - - Universal plates | — | → |
| 7211.13.19 | - - - - Other | — | → |
| 7211.13.92 | - - - - Hoop and strip | — | → |
| 7211.13.93 | - - - - Universal plates | — | → |
| 7211.13.99 | - - - - Other | — | → |
| 7211.14 | - - Other, of a thickness of 4.75 mm or more : | — | → |
| 7211.14.14 | - - - - Corrugated | — | → |
| 7211.14.15 | - - - - Coils for re-rolling | — | → |
| 7211.14.16 | - - - - Hoop and strip | — | → |
| 7211.14.17 | - - - - Universal plates | — | → |
| 7211.14.19 | - - - - Other | — | → |
| 7211.14.94 | - - - - Hoop and strip | — | → |
| 7211.14.95 | - - - - Universal plates | — | → |
| 7211.14.99 | - - - - Other | — | → |
| 7211.19 | - - Other : | — | → |
| 7211.19.13 | - - - - Hoop and strip; universal plates | — | → |
| 7211.19.14 | - - - - Corrugated | — | → |
| 7211.19.19 | - - - - Other | — | → |
| 7211.19.91 | - - - - Hoop and strip; universal plates | — | → |
| 7211.19.99 | - - - - Other | — | → |
| 7211.23 | - - Containing by weight less than 0.25 % of carbon : | — | → |
| 7211.23.10 | - - - Corrugated | — | → |
| 7211.23.20 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7211.23.30 | - - - Other, of a thickness of 0.17 mm or less | — | → |
| 7211.23.90 | - - - Other | — | → |
| 7211.29 | - - Other : | — | → |
| 7211.29.10 | - - - Corrugated | — | → |
| 7211.29.20 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7211.29.30 | - - - Other, of a thickness of 0.17 mm or less | — | → |
| 7211.29.90 | - - - Other | — | → |
| 7211.90 | - Other : | — | → |
| 7211.90.11 | - - - Hoop and strip, of a width not exceeding 25 mm | — | → |
| 7211.90.12 | - - - Hoop and strip, of a width exceeding 400 mm | — | → |
| 7211.90.13 | - - - Corrugated | — | → |
| 7211.90.14 | - - - Other, of a thickness of 0.17 mm or less | — | → |
| 7211.90.19 | - - - Other | — | → |
| 7211.90.91 | - - - Of a thickness of 0.17 mm or less | — | → |
| 7211.90.99 | - - - Other | — | → |
| 7212.10 | - Plated or coated with tin : | — | → |
| 7212.10.11 | - - - Hoop and strip, of a width not exceeding 25 mm | — | → |
| 7212.10.14 | - - - Hoop and strip, of a width exceeding 400 mm | — | → |
| 7212.10.19 | - - - Other | — | → |
| 7212.10.94 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7212.10.99 | - - - Other | — | → |
| 7212.20 | - Electrolytically plated or coated with zinc : | — | → |
| 7212.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7212.20.20 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | — | → |
| 7212.20.90 | - - Other | — | → |
| 7212.30 | - Otherwise plated or coated with zinc : | — | → |
| 7212.30.11 | - - - Hoop and strip, of a width not exceeding 25 mm | — | → |
| 7212.30.12 | - - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm | — | → |
| 7212.30.13 | - - - Other, of a thickness of 1.5 mm or less | — | → |
| 7212.30.14 | - - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04 % of carbon | — | → |
| 7212.30.19 | - - - Other | — | → |
| 7212.30.90 | - - Other | — | → |
| 7212.40 | - Painted, varnished or coated with plastics : | — | → |
| 7212.40.11 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7212.40.12 | - - - Other hoop and strip | — | → |
| 7212.40.13 | - - - Other, painted after coating with zinc | — | → |
| 7212.40.14 | - - - Other, painted after coating with aluminium-zinc alloys | — | → |
| 7212.40.19 | - - - Other | — | → |
| 7212.40.91 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7212.40.99 | - - - Other | — | → |
| 7212.50 | - Otherwise plated or coated : | — | → |
| 7212.50.14 | - - - Hoop and strip, of a width exceeding 25 mm; universal plates | — | → |
| 7212.50.19 | - - - Other | — | → |
| 7212.50.23 | - - - Hoop and strip, of a width not exceeding 25 mm | — | → |
| 7212.50.24 | - - - Other hoop and strip; universal plates | — | → |
| 7212.50.29 | - - - Other | — | → |
| 7212.50.93 | - - - Hoop and strip, of a width not exceeding 25 mm | — | → |
| 7212.50.94 | - - - Other hoop and strip; universal plates | — | → |
| 7212.50.99 | - - - Other | — | → |
| 7212.60 | - Clad : | — | → |
| 7212.60.11 | - - - Hoop and strip | — | → |
| 7212.60.12 | - - - Other, of a thickness of 1.5 mm or less | — | → |
| 7212.60.19 | - - - Other | — | → |
| 7212.60.91 | - - - Hoop and strip | — | → |
| 7212.60.99 | - - - Other | — | → |
| 7213.10.10 | - - Of circular cross-section measuring not exceeding 50 mm in diameter | — | → |
| 7213.10.90 | - - Other | — | → |
| 7213.20.00 | - Other, of free-cutting steel | — | → |
| 7213.91 | - - Of circular cross-section measuring less than 14 mm in diameter : | — | → |
| 7213.91.10 | - - - Of a kind used for producing soldering sticks | — | → |
| 7213.91.20 | - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7213.91.30 | - - - Other, containing by weight 0.6 % or more of carbon, not more than 0.03 % of phosphorus and not more than 0.035 % of sulphur | — | → |
| 7213.91.90 | - - - Other | — | → |
| 7213.99 | - - Other : | — | → |
| 7213.99.10 | - - - Of a kind used for producing soldering sticks | — | → |
| 7213.99.20 | - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7213.99.90 | - - - Other | — | → |
| 7214.10 | - Forged : | — | → |
| 7214.10.11 | - - - Of circular cross-section | — | → |
| 7214.10.19 | - - - Other | — | → |
| 7214.10.21 | - - - Of circular cross-section | — | → |
| 7214.10.29 | - - - Other | — | → |
| 7214.20 | - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling : | — | → |
| 7214.20.31 | - - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7214.20.39 | - - - - Other | — | → |
| 7214.20.41 | - - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7214.20.49 | - - - - Other | — | → |
| 7214.20.51 | - - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7214.20.59 | - - - - Other | — | → |
| 7214.20.61 | - - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7214.20.69 | - - - - Other | — | → |
| 7214.30 | - Other, of free-cutting steel : | — | → |
| 7214.30.10 | - - Of circular cross-section | — | → |
| 7214.30.90 | - - Other | — | → |
| 7214.91 | - - Of rectangular (other than square) cross-section : | — | → |
| 7214.91.11 | - - - - Containing by weight 0.38 % or more of carbon and less than 1.15% of manganese | — | → |
| 7214.91.12 | - - - - Containing by weight 0.17 % or more but not more than 0.46 % of carbon and 1.2 % or more but less than 1.65 % of manganese | — | → |
| 7214.91.19 | - - - - Other | — | → |
| 7214.91.20 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7214.99 | - - Other : | — | → |
| 7214.99.11 | - - - - Containing by weight less than 1.15 % of manganese | — | → |
| 7214.99.19 | - - - - Other | — | → |
| 7214.99.91 | - - - - Containing by weight less than 0.38 % of carbon, not more than 0.05 % of phosphorus and not more than 0.05 % of sulphur | — | → |
| 7214.99.92 | - - - - Containing by weight 0.38 % or more of carbon and less than 1.15 % of manganese | — | → |
| 7214.99.93 | - - - - Containing by weight 0.17 % or more but less than 0.46 % of carbon and 1.2 % or more but less than 1.65 % of manganese | — | → |
| 7214.99.99 | - - - - Other | — | → |
| 7215.10 | - Of free-cutting steel, not further worked than cold-formed or cold-finished : | — | → |
| 7215.10.10 | - - Of circular cross-section | — | → |
| 7215.10.90 | - - Other | — | → |
| 7215.50 | - Other, not further worked than cold-formed or cold-finished : | — | → |
| 7215.50.10 | - - Containing by weight 0.6 % or more of carbon, other than of circular cross-section | — | → |
| 7215.50.91 | - - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7215.50.99 | - - - Other | — | → |
| 7215.90 | - Other : | — | → |
| 7215.90.10 | - - Of a kind used for concrete reinforcement (rebars) | — | → |
| 7215.90.91 | - - - Of circular cross-section | — | → |
| 7215.90.99 | - - - Other | — | → |
| 7216.10.00 | - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | — | → |
| 7216.21 | - - L sections : | — | → |
| 7216.21.10 | - - - Containing by weight less than 0.6 % of carbon | — | → |
| 7216.21.90 | - - - Other | — | → |
| 7216.22.00 | - - T sections | — | → |
| 7216.31 | - - U sections : | — | → |
| 7216.31.10 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7216.31.90 | - - - Other | — | → |
| 7216.32 | - - I sections : | — | → |
| 7216.32.10 | - - - Of a thickness of 5 mm or less | — | → |
| 7216.32.90 | - - - Other | — | → |
| 7216.33 | - - H sections : | — | → |
| 7216.33.11 | - - - - Thickness of the flange not less than thickness of the web | — | → |
| 7216.33.19 | - - - - Other | — | → |
| 7216.33.90 | - - - Other | — | → |
| 7216.40 | - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : | — | → |
| 7216.40.10 | - - Containing by weight 0.6 % or more of carbon | — | → |
| 7216.40.90 | - - Other | — | → |
| 7216.50 | - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded : | — | → |
| 7216.50.11 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7216.50.19 | - - - Other | — | → |
| 7216.50.91 | - - - Containing by weight 0.6 % or more of carbon | — | → |
| 7216.50.99 | - - - Other | — | → |
| 7216.61.00 | - - Obtained from flat-rolled products | — | → |
| 7216.69.00 | - - Other | — | → |
| 7216.91 | - - Cold-formed or cold-finished from flat-rolled products : | — | → |
| 7216.91.10 | - - - Angles, other than slotted angles, containing by weight 0.6 % or more of carbon | — | → |
| 7216.91.90 | - - - Other | — | → |
| 7216.99.00 | - - Other | — | → |
| 7217.10 | - Not plated or coated, whether or not polished : | — | → |
| 7217.10.10 | - - Containing by weight less than 0.25 % of carbon | — | → |
| 7217.10.22 | - - - Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire | — | → |
| 7217.10.29 | - - - Other | — | → |
| 7217.10.32 | - - - Spokes wire; reed wire; free-cutting steel wire | — | → |
| 7217.10.33 | - - - Wire of a kind used for making strands for prestressing concrete | — | → |
| 7217.10.39 | - - - Other | — | → |
| 7217.20 | - Plated or coated with zinc : | — | → |
| 7217.20.10 | - - Containing by weight less than 0.25 % of carbon | — | → |
| 7217.20.20 | - - Containing by weight 0.25 % or more of carbon but less than 0.45 % of carbon | — | → |
| 7217.20.91 | - - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR) | — | → |
| 7217.20.99 | - - - Other | — | → |
| 7217.30 | - Plated or coated with other base metals : | — | → |
| 7217.30.11 | - - - Plated or coated with tin | — | → |
| 7217.30.19 | - - - Other | — | → |
| 7217.30.20 | - - Containing by weight 0.25 % or more of carbon but less than 0.6 % of carbon | — | → |
| 7217.30.33 | - - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres | — | → |
| 7217.30.34 | - - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres | — | → |
| 7217.30.35 | - - - Other, plated or coated with tin | — | → |
| 7217.30.39 | - - - Other | — | → |
| 7217.90 | - Other : | — | → |
| 7217.90.10 | - - Containing by weight less than 0.25 % of carbon | — | → |
| 7217.90.90 | - - Other | — | → |
| 7218.10.00 | - Ingots and other primary forms | — | → |
| 7218.91.00 | - - Of rectangular (other than square) cross-section | — | → |
| 7218.99.00 | - - Other | — | → |
| 7219.11.00 | - - Of a thickness exceeding 10 mm | — | → |
| 7219.12.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | → |
| 7219.13.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7219.14.00 | - - Of a thickness of less than 3 mm | — | → |
| 7219.21.00 | - - Of a thickness exceeding 10 mm | — | → |
| 7219.22.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | — | → |
| 7219.23.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7219.24.00 | - - Of a thickness of less than 3 mm | — | → |
| 7219.31.00 | - - Of a thickness of 4.75 mm or more | — | → |
| 7219.32.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | — | → |
| 7219.33.00 | - - Of a thickness exceeding 1 mm but less than 3 mm | — | → |
| 7219.34.00 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm | — | → |
| 7219.35.00 | - - Of a thickness of less than 0.5 mm | — | → |
| 7219.90.00 | - Other | — | → |
| 7220.11 | - - Of a thickness of 4.75 mm or more : | — | → |
| 7220.11.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7220.11.90 | - - - Other | — | → |
| 7220.12 | - - Of a thickness of less than 4.75 mm : | — | → |
| 7220.12.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7220.12.90 | - - - Other | — | → |
| 7220.20 | - Not further worked than cold-rolled (cold-reduced) : | — | → |
| 7220.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7220.20.90 | - - Other | — | → |
| 7220.90 | - Other : | — | → |
| 7220.90.10 | - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7220.90.90 | - - Other | — | → |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. | — | → |
| 7222.11.00 | - - Of circular cross-section | — | → |
| 7222.19.00 | - - Other | — | → |
| 7222.20 | - Bars and rods, not further worked than cold-formed or cold-finished : | — | → |
| 7222.20.10 | - - Of circular cross-section | — | → |
| 7222.20.90 | - - Other | — | → |
| 7222.30 | - Other bars and rods : | — | → |
| 7222.30.10 | - - Of circular cross-section | — | → |
| 7222.30.90 | - - Other | — | → |
| 7222.40 | - Angles, shapes and sections : | — | → |
| 7222.40.10 | - - Not further worked than hot-rolled, hot-drawn or extruded | — | → |
| 7222.40.90 | - - Other | — | → |
| 7223.00.10 | - Of cross-section exceeding 13 mm | — | → |
| 7223.00.90 | - Other | — | → |
| 7224.10.00 | - Ingots and other primary forms | — | → |
| 7224.90.00 | - Other | — | → |
| 7225.11.00 | - - Grain-oriented | — | → |
| 7225.19.00 | - - Other | — | → |
| 7225.30 | - Other, not further worked than hot-rolled, in coils : | — | → |
| 7225.30.10 | - - Of high speed steel | — | → |
| 7225.30.90 | - - Other | — | → |
| 7225.40 | - Other, not further worked than hot-rolled, not in coils : | — | → |
| 7225.40.10 | - - Of high speed steel | — | → |
| 7225.40.90 | - - Other | — | → |
| 7225.50 | - Other, not further worked than cold-rolled (cold-reduced) : | — | → |
| 7225.50.10 | - - Of high speed steel | — | → |
| 7225.50.90 | - - Other | — | → |
| 7225.91 | - - Electrolytically plated or coated with zinc : | — | → |
| 7225.91.10 | - - - Of high speed steel | — | → |
| 7225.91.90 | - - - Other | — | → |
| 7225.92 | - - Otherwise plated or coated with zinc : | — | → |
| 7225.92.10 | - - - Of high speed steel | — | → |
| 7225.92.20 | - - - Other, plated or coated with zinc-aluminium-magnesium alloys | — | → |
| 7225.92.90 | - - - Other | — | → |
| 7225.99 | - - Other : | — | → |
| 7225.99.10 | - - - Of high speed steel | — | → |
| 7225.99.90 | - - - Other | — | → |
| 7226.11 | - - Grain-oriented : | — | → |
| 7226.11.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7226.11.90 | - - - Other | — | → |
| 7226.19 | - - Other : | — | → |
| 7226.19.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7226.19.90 | - - - Other | — | → |
| 7226.20 | - Of high speed steel : | — | → |
| 7226.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7226.20.90 | - - Other | — | → |
| 7226.91 | - - Not further worked than hot-rolled : | — | → |
| 7226.91.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7226.91.90 | - - - Other | — | → |
| 7226.92 | - - Not further worked than cold-rolled (cold-reduced) : | — | → |
| 7226.92.10 | - - - Hoop and strip, of a width not exceeding 400 mm | — | → |
| 7226.92.90 | - - - Other | — | → |
| 7226.99 | - - Other : | — | → |
| 7226.99.11 | - - - - Plated or coated with zinc | — | → |
| 7226.99.19 | - - - - Other | — | → |
| 7226.99.91 | - - - - Plated or coated with zinc | — | → |
| 7226.99.99 | - - - - Other | — | → |
| 7227.10.00 | - Of high speed steel | — | → |
| 7227.20.00 | - Of silico-manganese steel | — | → |
| 7227.90 | - Other : | — | → |
| 7227.90.10 | - - Containing by weight 0.5 % or more of chromium | — | → |
| 7227.90.90 | - - Other | — | → |
| 7228.10 | - Bars and rods, of high speed steel : | — | → |
| 7228.10.10 | - - Of circular cross-section | — | → |
| 7228.10.90 | - - Other | — | → |
| 7228.20 | - Bars and rods, of silico-manganese steel : | — | → |
| 7228.20.11 | - - - Not further worked than hot-rolled, hot-drawn or extruded | — | → |
| 7228.20.19 | - - - Other | — | → |
| 7228.20.91 | - - - Not further worked than hot-rolled, hot-drawn or extruded | — | → |
| 7228.20.99 | - - - Other | — | → |
| 7228.30 | - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : | — | → |
| 7228.30.10 | - - Of circular cross-section | — | → |
| 7228.30.90 | - - Other | — | → |
| 7228.40 | - Other bars and rods, not further worked than forged : | — | → |
| 7228.40.10 | - - Of circular cross-section | — | → |
| 7228.40.90 | - - Other | — | → |
| 7228.50 | - Other bars and rods, not further worked than cold-formed or cold-finished : | — | → |
| 7228.50.10 | - - Of circular cross-section | — | → |
| 7228.50.90 | - - Other | — | → |
| 7228.60 | - Other bars and rods : | — | → |
| 7228.60.10 | - - Of circular cross-section | — | → |
| 7228.60.90 | - - Other | — | → |
| 7228.70 | - Angles, shapes and sections : | — | → |
| 7228.70.10 | - - Not further worked than hot-rolled, hot-drawn or extruded | — | → |
| 7228.70.90 | - - Other | — | → |
| 7228.80 | - Hollow drill bars and rods : | — | → |
| 7228.80.11 | - - - Of circular cross-section | — | → |
| 7228.80.19 | - - - Other | — | → |
| 7228.80.90 | - - Other | — | → |
| 7229.20.00 | - Of silico-manganese steel | — | → |
| 7229.90 | - Other : | — | → |
| 7229.90.21 | - - - Containing by weight 0.5 % or more of chromium | — | → |
| 7229.90.29 | - - - Other | — | → |
| 7229.90.30 | - - Other, of high speed steel | — | → |
| 7229.90.91 | - - - Containing by weight 0.5 % or more of chromium | — | → |
| 7229.90.99 | - - - Other | — | → |