日本 · 第 72· 339 条目
§72钢铁
本章品目（4 位 WCO 统一）
29 个品目
7201生铁及镜铁，块、锭或其他初级形状→7202铁合金→7203直接还原铁、其他海绵状黑色金属及高纯铁→7204黑色金属废碎料；钢铁再熔废碎料锭→7205生铁、镜铁、钢铁颗粒及粉末→7206钢铁及非合金钢锭或其他初级形状→7207钢铁或非合金钢半制品→7208宽度≥600毫米的钢铁或非合金钢热轧扁平材，未包、镀或涂层→7209宽度≥600毫米的钢铁或非合金钢冷轧扁平材，未包、镀或涂层→7210宽度≥600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7211宽度<600毫米的钢铁或非合金钢扁平材，未包、镀或涂层→7212宽度<600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7213钢铁或非合金钢热轧不规则盘卷盘条→7214钢铁或非合金钢其他条、杆，经锻、热轧、热拉或热挤压，或轧后扭曲→7215钢铁或非合金钢其他条、杆→7216钢铁或非合金钢型钢→7217钢铁或非合金钢丝→7218不锈钢锭、其他初级形状及半制品→7219不锈钢平板轧材，宽度≥600毫米→7220不锈钢平板轧材，宽度<600毫米→7221不锈钢热轧不规则盘卷的条、杆→7222其他不锈钢条、杆；不锈钢角材、型材及异型材→7223不锈钢丝→7224其他合金钢锭、其他初级形状及半制品→7225其他合金钢平板轧材，宽度≥600毫米→7226其他合金钢平板轧材，宽度<600毫米→7227其他合金钢热轧不规则盘卷的条、杆→7228其他合金钢条、杆、型材及空心钻杆→7229其他合金钢丝→
日本 全部税号
| HS 编码 | 商品描述 | 首要税率 | |
|---|---|---|---|
| 720110010 | - Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus | Free | → |
| 720110091 | -- Containing by weight less than 1.6 % of silicon | Free | → |
| 720110099 | -- Other | Free | → |
| 720120000 | Non-alloy pig iron containing by weight more than 0.5 % of phosphorus | Free | → |
| 720150000 | Alloy pig iron; spiegeleisen | Free | → |
| 720211000 | Containing by weight more than 2 % of carbon | 7.7% | → |
| 720219000 | Other | 7.7% | → |
| 720221000 | Containing by weight more than 55 % of silicon | Free | → |
| 720229000 | Other | 3% | → |
| 720230000 | Ferro-silico-manganese | 3% | → |
| 720241000 | Containing by weight more than 4 % of carbon | Free | → |
| 720249000 | Other | 7.2% | → |
| 720250000 | Ferro-silico-chromium | 3% | → |
| 720260010 | - Containing by weight less than 33 % of nickel | 5.9% | → |
| 720260090 | - Other | 5.9% | → |
| 720270000 | Ferro-molybdenum | 3.9% | → |
| 720280010 | 1 Ferro-tungsten | 2% | → |
| 720280020 | 2 Ferro-silico-tungsten | 3% | → |
| 720291000 | Ferro-titanium and ferro-silico-titanium | 3% | → |
| 720292000 | Ferro-vanadium | 3% | → |
| 720293000 | Ferro-niobium | Free | → |
| 720299010 | - Ferro-phosphorus | 3% | → |
| 720299090 | - Other | 3% | → |
| 720310000 | Ferrous products obtained by direct reduction of iron ore | Free | → |
| 720390000 | Other | Free | → |
| 720410000 | Waste and scrap of cast iron | Free | → |
| 720421000 | Of stainless steel | Free | → |
| 720429000 | Other | Free | → |
| 720430000 | Waste and scrap of tinned iron or steel | Free | → |
| 720441000 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free | → |
| 720449000 | Other | Free | → |
| 720450010 | 1 Of alloy steel | 5.7% | → |
| 720450020 | 2 Other | 4.1% | → |
| 720510000 | Granules | Free | → |
| 720521010 | - Containing not less than 1% but less than 5 % by weight of nickel | Free | → |
| 720521090 | - Other | Free | → |
| 720529000 | Other | Free | → |
| 720610010 | 1 Containing by weight less than 0.6 % of carbon | Free | → |
| 720610020 | 2 Other | 4.6% | → |
| 720690010 | 1 Containing by weight less than 0.6 % of carbon | Free | → |
| 720690020 | 2 Other | 4.6% | → |
| 720711000 | Of rectangular (including square) cross-section, the width measuring less than twice the thickness | Free | → |
| 720712000 | Other, of rectangular (other than square) cross-section | Free | → |
| 720719000 | Other | Free | → |
| 720720011 | - Billets | — | → |
| 720720012 | - Slabs | — | → |
| 720720019 | - Other | — | → |
| 720720020 | 2 Other | 4.6% | → |
| 720810010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720810021 | (1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 720810029 | (2)Other | 3.9% | → |
| 720825011 | - Of a thickness of less than 6 mm | — | → |
| 720825019 | - Other | — | → |
| 720825020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720825030 | (2)Other | 3.9% | → |
| 720826011 | - High tensile steel of a tensile strength of 490 MPa or more | — | → |
| 720826019 | - Other | — | → |
| 720826021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720826029 | (2)Other | 3.9% | → |
| 720827011 | - High tensile steel of a tensile strength of 490 MPa or more | — | → |
| 720827019 | - Other | — | → |
| 720827021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720827029 | (2)Other | 3.9% | → |
| 720836010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 720836021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720836029 | (2)Other | 3.9% | → |
| 720837011 | - Of a thickness of less than 6 mm | — | → |
| 720837019 | - Other | — | → |
| 720837020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720837030 | (2)Other | 3.9% | → |
| 720838010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 720838021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720838029 | (2)Other | 3.9% | → |
| 720839010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720839021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720839029 | (2)Other | 3.9% | → |
| 720840010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720840020 | (1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 720840030 | (2)Other | 3.9% | → |
| 720851011 | - Of a thickness of not exceeding 50 mm | — | → |
| 720851019 | - Of a thickness exceeding 50 mm | — | → |
| 720851021 | - Of a thickness of not exceeding 50 mm | — | → |
| 720851029 | - Of a thickness exceeding 50 mm | — | → |
| 720851030 | (2)Other | 3.9% | → |
| 720852011 | - Of a thickness of less than 6 mm | — | → |
| 720852019 | - Other | — | → |
| 720852020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720852031 | - Of a thickness of less than 6 mm | — | → |
| 720852039 | - Other | — | → |
| 720853010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720853021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720853029 | (2)Other | 3.9% | → |
| 720854010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720854021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720854029 | (2)Other | 3.9% | → |
| 720890000 | Other | 3.9% | → |
| 720915010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720915021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720915029 | (2)Other | 3.9% | → |
| 720916011 | - High tensile steel of a tensile strength of 340 MPa or more | — | → |
| 720916019 | - Other | — | → |
| 720916021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720916029 | (2)Other | 3.9% | → |
| 720917011 | - High tensile steel of a tensile strength of 340 MPa or more | — | → |
| 720917019 | - Other | — | → |
| 720917021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720917029 | (2)Other | 3.9% | → |
| 720918010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720918021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720918029 | (2)Other | 3.9% | → |
| 720925010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720925021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720925029 | (2)Other | 3.9% | → |
| 720926010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720926021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720926029 | (2)Other | 3.9% | → |
| 720927010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720927021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720927029 | (2)Other | 3.9% | → |
| 720928010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720928021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720928029 | (2)Other | 3.9% | → |
| 720990000 | Other | 3.9% | → |
| 721011000 | Of a thickness of 0.5 mm or more | 3.9% | → |
| 721012000 | Of a thickness of less than 0.5 mm | 3.9% | → |
| 721020000 | Plated or coated with lead, including terne-plate | 3.9% | → |
| 721030010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 721030021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721030029 | (2)Other | 3.9% | → |
| 721041000 | Corrugated | 3.9% | → |
| 721049010 | - Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers) | 3.9% | → |
| 721049021 | -- Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | 3.9% | → |
| 721049029 | -- Other | 3.9% | → |
| 721050010 | - Tinfree steel | 3.9% | → |
| 721050090 | - Other | 3.9% | → |
| 721061000 | Plated or coated with aluminium-zinc alloys | 3.9% | → |
| 721069000 | Other | 3.9% | → |
| 721070000 | Painted, varnished or coated with plastics | 3.9% | → |
| 721090010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721090020 | 2 Other | 4.6% | → |
| 721113010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721113021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 721113029 | (2)Other | 3.9% | → |
| 721114010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721114021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 721114029 | (2)Other | 3.9% | → |
| 721119010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721119021 | (1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721119029 | (2)Other | 3.9% | → |
| 721123000 | Containing by weight less than 0.25 % of carbon | 3.9% | → |
| 721129010 | 1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721129090 | 2 Other | 3.9% | → |
| 721190000 | Other | 3.9% | → |
| 721210000 | Plated or coated with tin | 3.9% | → |
| 721220010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721220021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721220029 | (2)Other | 3.9% | → |
| 721230010 | - Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | 3.9% | → |
| 721230090 | - Other | 3.9% | → |
| 721240000 | Painted, varnished or coated with plastics | 3.9% | → |
| 721250010 | - Tinfree steel | 3.9% | → |
| 721250090 | - Other | 3.9% | → |
| 721260010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721260020 | 2 Other | 4.6% | → |
| 721310000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process | 3.9% | → |
| 721320000 | Other, of free-cutting steel | 3.9% | → |
| 721391011 | -- Measuring less than 6 mm in diameter | — | → |
| 721391019 | -- Other | — | → |
| 721391020 | - Other | — | → |
| 721391090 | 2 Other | 4.6% | → |
| 721399020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721399090 | 2 Other | 4.6% | → |
| 721410000 | Forged | 3.9% | → |
| 721420000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | 3.9% | → |
| 721430000 | Other, of free-cutting steel | 3.9% | → |
| 721491020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721491090 | 2 Other | 4.6% | → |
| 721499020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721499090 | 2 Other | 4.6% | → |
| 721510000 | Of free-cutting steel, not further worked than cold-formed or cold-finished | 3.9% | → |
| 721550010 | - Containing by weight less than 0.25 % of carbon | — | → |
| 721550019 | - Other | — | → |
| 721550090 | 2 Other | 4.6% | → |
| 721590010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 721590020 | 2 Other | 4.6% | → |
| 721610000 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 3.9% | → |
| 721621000 | L sections | 3.9% | → |
| 721622000 | T sections | 3.9% | → |
| 721631000 | U sections | 3.9% | → |
| 721632000 | I sections | 3.9% | → |
| 721633000 | H sections | 3.9% | → |
| 721640000 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | 3.9% | → |
| 721650000 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 3.9% | → |
| 721661000 | Obtained from flat-rolled products | 3.9% | → |
| 721669000 | Other | 3.9% | → |
| 721691000 | Cold-formed or cold-finished from flat-rolled products | 3.9% | → |
| 721699000 | Other | 3.9% | → |
| 721710010 | - Containing by weight less than 0.25 % of carbon | — | → |
| 721710019 | - Other | — | → |
| 721710090 | 2 Other | 4.6% | → |
| 721720010 | -- Of any cross sectional dimension not exceeding 1.5 mm | — | → |
| 721720011 | -- Other, plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, of circular or oval cross-section | — | → |
| 721720019 | -- Other | — | → |
| 721720090 | - Other | — | → |
| 721720099 | 2 Other | 4.6% | → |
| 721730011 | -- Solid wire for gas sealed arc welding | — | → |
| 721730019 | -- Other | — | → |
| 721730090 | - Other | — | → |
| 721730099 | 2 Other | 4.6% | → |
| 721790011 | - Containing by weight less than 0.25 % of carbon | — | → |
| 721790019 | - Other | — | → |
| 721790090 | 2 Other | 4.6% | → |
| 721810000 | Ingots and other primary forms | 4.6% | → |
| 721891000 | Of rectangular (other than square) cross-section | 4.6% | → |
| 721899000 | Other | 4.6% | → |
| 721911000 | Of a thickness exceeding 10 mm | 4.6% | → |
| 721912011 | - Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements | 4.6% | → |
| 721912027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721912028 | --- Other | 4.6% | → |
| 721912029 | -- Other | 4.6% | → |
| 721913011 | - Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements | 4.6% | → |
| 721913027 | ---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721913028 | --- Other | 4.6% | → |
| 721913029 | -- Other | 4.6% | → |
| 721914000 | Of a thickness of less than 3 mm | 4.6% | → |
| 721921000 | Of a thickness exceeding 10 mm | 4.6% | → |
| 721922000 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 4.6% | → |
| 721923000 | Of a thickness of 3 mm or more but less than 4.75 mm | 4.6% | → |
| 721924000 | Of a thickness of less than 3 mm | 4.6% | → |
| 721931000 | Of a thickness of 4.75 mm or more | 4.6% | → |
| 721932011 | - Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element | 4.6% | → |
| 721932022 | -- Containing by weight 7 % or more but less than 10 % of nickel | 4.6% | → |
| 721932023 | --Containing by weight more than 10 % of nickel | 4.6% | → |
| 721932027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721932028 | --- Other | 4.6% | → |
| 721933012 | -- Containing by weight less than 12 % of chromium | 4.6% | → |
| 721933013 | -- Other | 4.6% | → |
| 721933022 | -- Containing by weight 7 % or more but less than 10 % of nickel | 4.6% | → |
| 721933023 | -- Containing by weight 10 % or more of nickel | 4.6% | → |
| 721933027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721933028 | --- Other | 4.6% | → |
| 721934012 | -- Containing by weight less than 12 % of chromium | 4.6% | → |
| 721934013 | -- Other | 4.6% | → |
| 721934022 | -- Containing by weight 7 % or more but less than 10 % of nickel | 4.6% | → |
| 721934023 | -- Containing by weight 10 % or more of nickel | 4.6% | → |
| 721934027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721934028 | --- Other | 4.6% | → |
| 721935011 | - Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element | 4.6% | → |
| 721935022 | -- Containing by weight 7 % or more but less than 10 % of nickel | 4.6% | → |
| 721935023 | -- Containing by weight 10 % or more of nickel | 4.6% | → |
| 721935027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 721935028 | --- Other | 4.6% | → |
| 721990000 | Other | 4.6% | → |
| 722011000 | Of a thickness of 4.75 mm or more | 4.6% | → |
| 722012000 | Of a thickness of less than 4.75 mm | 4.6% | → |
| 722020011 | - Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element | 4.6% | → |
| 722020027 | --- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese | 4.6% | → |
| 722020028 | --- Other | 4.6% | → |
| 722020029 | -- Other | 4.6% | → |
| 722090000 | Other | 4.6% | → |
| 722100000 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | 4.6% | → |
| 722211000 | Of circular cross-section | 4.6% | → |
| 722219000 | Other | 4.6% | → |
| 722220000 | Bars and rods, not further worked than cold-formed or cold-finished | 4.6% | → |
| 722230000 | Other bars and rods | 4.6% | → |
| 722240000 | Angles, shapes and sections | 4.6% | → |
| 722300000 | Wire of stainless steel | 4.6% | → |
| 722410010 | 1 Of high speed steel | 6.6% | → |
| 722410020 | 2 Of alloy tool steel, containing by weight not less than 0.5 %, separately or together, of tungsten or molybdenum | 5.8% | → |
| 722410030 | 3 Other | 4.6% | → |
| 722490010 | 1 Of high speed steel | 6.6% | → |
| 722490020 | 2 Of alloy tool steel | 5.8% | → |
| 722490030 | 3 Other | 4.6% | → |
| 722511000 | Grain-oriented | 4.6% | → |
| 722519010 | - Of a thickness of less than 0.35 mm, containing by weight 3.0 % or more of silicon | 4.6% | → |
| 722519090 | - Other | 4.6% | → |
| 722530100 | 1 Of alloy tool steel | 5.8% | → |
| 722530200 | 2 Of high speed steel | 6.6% | → |
| 722530910 | - Pickled | — | → |
| 722530990 | - Other | — | → |
| 722540100 | 1 Of alloy tool steel | 5.8% | → |
| 722540200 | 2 Of high speed steel | 6.6% | → |
| 722540910 | - Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter | — | → |
| 722540990 | - Other | — | → |
| 722550100 | 1 Of alloy tool steel | 5.8% | → |
| 722550200 | 2 Of high speed steel | 6.6% | → |
| 722550900 | 3 Other | 4.6% | → |
| 722591100 | 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel | 6.3% | → |
| 722591200 | 2 Of alloy tool steel | 5.8% | → |
| 722591300 | 3 Of high speed steel | 6.6% | → |
| 722591900 | 4 Other | 4.6% | → |
| 722592100 | 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel | 6.3% | → |
| 722592200 | 2 Of alloy tool steel | 5.8% | → |
| 722592300 | 3 Of high speed steel | 6.6% | → |
| 722592910 | - Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers) | — | → |
| 722592921 | -- Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | — | → |
| 722592929 | -- Other | — | → |
| 722599100 | 1 Bimetal, clad or combined, containing by weight more than 10 % of nickel | 6.3% | → |
| 722599200 | 2 Of alloy tool steel | 5.8% | → |
| 722599300 | 3 Of high speed steel | 6.6% | → |
| 722599900 | 4 Other | 4.6% | → |
| 722611000 | Grain-oriented | 4.6% | → |
| 722619010 | - Of a thickness of less than 0.35 mm, containing by weight 3.0 % or more of silicon | 4.6% | → |
| 722619090 | - Other | 4.6% | → |
| 722620000 | Of high speed steel | 6.6% | → |
| 722691010 | 1 Of alloy tool steel | 5.8% | → |
| 722691020 | 2 Other | 4.6% | → |
| 722692010 | 1 Of alloy tool steel | 5.8% | → |
| 722692020 | 2 Other | 4.6% | → |
| 722699110 | - Plated or coated with zinc | — | → |
| 722699190 | - Other | — | → |
| 722699200 | 2 Of alloy tool steel | 5.8% | → |
| 722699911 | -- Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | — | → |
| 722699919 | -- Other | — | → |
| 722699990 | - Other | — | → |
| 722710000 | Of high speed steel | 6.6% | → |
| 722720000 | Of silico-manganese steel | 4.6% | → |
| 722790010 | 1 Of alloy tool steel | 5.8% | → |
| 722790021 | - Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter | — | → |
| 722790029 | - Other | — | → |
| 722810000 | Bars and rods, of high speed steel | 6.6% | → |
| 722820000 | Bars and rods, of silico-manganese steel | 4.6% | → |
| 722830010 | 1 Of alloy tool steel | 5.8% | → |
| 722830020 | 2 Other | 4.6% | → |
| 722840010 | 1 Of alloy tool steel | 5.8% | → |
| 722840020 | 2 Other | 4.6% | → |
| 722850010 | 1 Of alloy tool steel | 5.8% | → |
| 722850020 | 2 Other | 4.6% | → |
| 722860010 | 1 Of alloy tool steel | 5.8% | → |
| 722860020 | 2 Other | 4.6% | → |
| 722870010 | 1 Of alloy tool steel | 5.8% | → |
| 722870020 | 2 Other | 4.6% | → |
| 722880000 | Hollow drill bars and rods | 5.8% | → |
| 722920000 | Of silico-manganese steel | 4.6% | → |
| 722990100 | 1 Of alloy tool steel | 5.8% | → |
| 722990200 | 2 Of high speed steel | 6.6% | → |
| 722990910 | - Solid wire for gas sealed arc welding | — | → |
| 722990920 | �|Plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, containing by weight 0.0008% or more but not exceeding 0.007% of boron, less than proportions of elements other than boron listed in Note 1 (f) to this Chapter, less than 0.25% of carbon, of circular or oval cross-section, of any cross sectional dimension exceeding 1.5mm | — | → |
| 722990990 | - Other | — | → |