澳大利亚 · 第 72· 179 条目
§72钢铁
本章品目（4 位 WCO 统一）
29 个品目
7201生铁及镜铁，块、锭或其他初级形状→7202铁合金→7203直接还原铁、其他海绵状黑色金属及高纯铁→7204黑色金属废碎料；钢铁再熔废碎料锭→7205生铁、镜铁、钢铁颗粒及粉末→7206钢铁及非合金钢锭或其他初级形状→7207钢铁或非合金钢半制品→7208宽度≥600毫米的钢铁或非合金钢热轧扁平材，未包、镀或涂层→7209宽度≥600毫米的钢铁或非合金钢冷轧扁平材，未包、镀或涂层→7210宽度≥600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7211宽度<600毫米的钢铁或非合金钢扁平材，未包、镀或涂层→7212宽度<600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7213钢铁或非合金钢热轧不规则盘卷盘条→7214钢铁或非合金钢其他条、杆，经锻、热轧、热拉或热挤压，或轧后扭曲→7215钢铁或非合金钢其他条、杆→7216钢铁或非合金钢型钢→7217钢铁或非合金钢丝→7218不锈钢锭、其他初级形状及半制品→7219不锈钢平板轧材，宽度≥600毫米→7220不锈钢平板轧材，宽度<600毫米→7221不锈钢热轧不规则盘卷的条、杆→7222其他不锈钢条、杆；不锈钢角材、型材及异型材→7223不锈钢丝→7224其他合金钢锭、其他初级形状及半制品→7225其他合金钢平板轧材，宽度≥600毫米→7226其他合金钢平板轧材，宽度<600毫米→7227其他合金钢热轧不规则盘卷的条、杆→7228其他合金钢条、杆、型材及空心钻杆→7229其他合金钢丝→
澳大利亚 全部税号
| HS 编码 | 商品描述 | 首要税率 | |
|---|---|---|---|
| 72011000 | Non-alloy pig iron containing by weight 0.5% or less of phosphorus | 5%DCS:Free | → |
| 72012000 | Non-alloy pig iron containing by weight more than 0.5% of phosphorus | 5%DCS:Free | → |
| 72015000 | Alloy pig iron; spiegeleisen | Free | → |
| 72021100 | Containing by weight more than 2% of carbon | Free | → |
| 72021900 | Other | Free | → |
| 72022100 | Containing by weight more than 55% of silicon | Free | → |
| 72022900 | Other | Free | → |
| 72023000 | Ferro-silico-manganese | Free | → |
| 72024100 | Containing by weight more than 4% of carbon | Free | → |
| 72024900 | Other | Free | → |
| 72025000 | Ferro-silico-chromium | Free | → |
| 72026000 | Ferro-nickel | Free | → |
| 72027000 | Ferro-molybdenum | Free | → |
| 72028000 | Ferro-tungsten and ferro-silico-tungsten | Free | → |
| 72029100 | Ferro-titanium and ferro-silico-titanium | Free | → |
| 72029200 | Ferro-vanadium | Free | → |
| 72029300 | Ferro-niobium | Free | → |
| 72029900 | Other | Free | → |
| 72031000 | Ferrous products obtained by direct reduction of iron ore | Free | → |
| 72039000 | Other | Free | → |
| 72041000 | Waste and scrap of cast iron | Free | → |
| 72042100 | Of stainless steel | Free | → |
| 72042900 | Other | Free | → |
| 72043000 | Waste and scrap of tinned iron or steel | Free | → |
| 72044100 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free | → |
| 72044900 | Other | Free | → |
| 72045000 | Remelting scrap ingots | 5%DCS:4%DCT:5% | → |
| 72051000 | Granules | Free | → |
| 72052100 | Of alloy steel | Free | → |
| 72052900 | Other | Free | → |
| 72061000 | Ingots | Free | → |
| 72069000 | Other | 5%DCS:Free | → |
| 72071100 | Of rectangular (including square) cross-section, the width measuring less than twice the thickness | 5%DCS:Free | → |
| 72071200 | Other, of rectangular (other than square) cross- section | 5%DCS:Free | → |
| 72071900 | Other | 5%DCS:Free | → |
| 72072000 | Containing by weight 0.25% or more of carbon | 5%DCS:Free | → |
| 72081000 | In coils, not further worked than hot-rolled, with patterns in relief | 5%DCS:Free | → |
| 72082500 | Of a thickness of 4.75 mm or more | 5%DCS:Free | → |
| 72082600 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:Free | → |
| 72082700 | Of a thickness of less than 3 mm | 5%DCS:Free | → |
| 72083600 | Of a thickness exceeding 10 mm | 5%DCS:Free | → |
| 72083700 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 5%DCS:Free | → |
| 72083800 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:Free | → |
| 72083900 | Of a thickness of less than 3 mm | 5%DCS:Free | → |
| 72084000 | Not in coils, not further worked than hot-rolled, with patterns in relief | 5%DCS:Free | → |
| 72085100 | Of a thickness exceeding 10 mm | 5%DCS:Free | → |
| 72085200 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 5%DCS:Free | → |
| 72085300 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:Free | → |
| 72085400 | Of a thickness of less than 3 mm | 5%DCS:Free | → |
| 72089000 | Other | 5%DCS:4%DCT:5% | → |
| 72091500 | Of a thickness of 3 mm or more | 5%DCS:FreeDCT:5% | → |
| 72091600 | Of a thickness exceeding 1 mm but less than 3 mm | 5%DCS:FreeDCT:5% | → |
| 72091700 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 5%DCS:FreeDCT:5% | → |
| 72091800 | Of a thickness of less than 0.5 mm | 5%DCS:FreeDCT:5% | → |
| 72092500 | Of a thickness of 3 mm or more | 5%DCS:FreeDCT:5% | → |
| 72092600 | Of a thickness exceeding 1 mm but less than 3 mm | 5%DCS:FreeDCT:5% | → |
| 72092700 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 5%DCS:FreeDCT:5% | → |
| 72092800 | Of a thickness of less than 0.5 mm | 5%DCS:FreeDCT:5% | → |
| 72099000 | Other | 5%DCS:FreeDCT:5% | → |
| 72101100 | Of a thickness of 0.5 mm or more | Free | → |
| 72101200 | Of a thickness of less than 0.5 mm | Free | → |
| 72102000 | Plated or coated with lead, including terne-plate | Free | → |
| 72103000 | Electrolytically plated or coated with zinc | 5%DCS:FreeDCT:5% | → |
| 72104100 | Corrugated | 5%DCS:FreeDCT:5% | → |
| 72104900 | Other | 5%DCS:FreeDCT:5% | → |
| 72105000 | Plated or coated with chromium oxides or with chromium and chromium oxides | 5%DCS:FreeDCT:5% | → |
| 72106100 | Plated or coated with aluminium-zinc alloys | 5%DCS:FreeDCT:5% | → |
| 72106900 | Other | 5%DCS:FreeDCT:5% | → |
| 72107000 | Painted, varnished or coated with plastics | 5%DCS:FreeDCT:5% | → |
| 72109000 | Other | 5%DCS:FreeDCT:5% | → |
| 72111300 | Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | 5%DCS:Free | → |
| 72111400 | Other, of a thickness of 4.75 mm or more | 5%DCS:Free | → |
| 72111900 | Other | 5%DCS:Free | → |
| 72112300 | Containing by weight less than 0.25% of carbon | 5%DCS:FreeDCT:5% | → |
| 72112900 | Other | 5%DCS:FreeDCT:5% | → |
| 72119000 | Other | 5%DCS:4%DCT:5% | → |
| 72121000 | Plated or coated with tin | Free | → |
| 72122000 | Electrolytically plated or coated with zinc | 5%DCS:FreeDCT:5% | → |
| 72123000 | Otherwise plated or coated with zinc | 5%DCS:FreeDCT:5% | → |
| 72124000 | Painted, varnished or coated with plastics | 5%DCS:FreeDCT:5% | → |
| 72125000 | Otherwise plated or coated | 5%DCS:FreeDCT:5% | → |
| 72126000 | Clad | 5%DCS:FreeDCT:5% | → |
| 72131000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process | 5%DCS:Free | → |
| 72132000 | Other, of free-cutting steel | 5%DCS:Free | → |
| 72139100 | Of circular cross-section measuring less than 14 mm in diameter | 5%DCS:Free | → |
| 72139900 | Other | 5%DCS:Free | → |
| 72141000 | Forged | 5%DCS:Free | → |
| 72142000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | 5%DCS:Free | → |
| 72143000 | Other, of free-cutting steel | 5%DCS:Free | → |
| 72149100 | Of rectangular (other than square) cross-section | 5%DCS:Free | → |
| 72149900 | Other | 5%DCS:Free | → |
| 72151010 | "Flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:Free | → |
| 72151090 | Other | 5%DCS:4%DCT:5% | → |
| 72155010 | "Flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:Free | → |
| 72155090 | Other | 5%DCS:4%DCT:5% | → |
| 72159000 | Other | 5%DCS:Free | → |
| 72161000 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 5%DCS:Free | → |
| 72162100 | L sections | 5%DCS:Free | → |
| 72162200 | T sections | 5%DCS:Free | → |
| 72163100 | U sections | 5%DCS:Free | → |
| 72163200 | I sections | 5%DCS:Free | → |
| 72163300 | H sections | 5%DCS:Free | → |
| 72164000 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | 5%DCS:Free | → |
| 72165000 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 5%DCS:Free | → |
| 72166100 | Obtained from flat-rolled products | 5%DCS:Free | → |
| 72166900 | Other | 5%DCS:Free | → |
| 72169100 | Cold-formed or cold-finished from flat-rolled products | 5%DCS:Free | → |
| 72169900 | Other | 5%DCS:Free | → |
| 72171000 | Not plated or coated, whether or not polished | 5%DCS:4%DCT:5% | → |
| 72172000 | Plated or coated with zinc | 5%DCS:4%DCT:5% | → |
| 72173000 | Plated or coated with other base metals | 5%DCS:4%DCT:5% | → |
| 72179000 | Other | 5%DCS:4%DCT:5% | → |
| 72181000 | Ingots and other primary forms | 5%DCS:4%DCT:5% | → |
| 72189100 | Of rectangular (other than square) cross-section | 5%DCS:4%DCT:5% | → |
| 72189900 | Other | 5%DCS:4%DCT:5% | → |
| 72191100 | Of a thickness exceeding 10 mm | Free | → |
| 72191200 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 5%DCS:4%DCT:5% | → |
| 72191300 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:4%DCT:5% | → |
| 72191400 | Of a thickness of less than 3 mm | Free | → |
| 72192100 | Of a thickness exceeding 10 mm | 5%DCS:4%DCT:5% | → |
| 72192200 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | 5%DCS:4%DCT:5% | → |
| 72192300 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:4%DCT:5% | → |
| 72192400 | Of a thickness of less than 3 mm | 5%DCS:4%DCT:5% | → |
| 72193100 | Of a thickness of 4.75 mm or more | 5%DCS:4%CA:FreeDCT:5% | → |
| 72193200 | Of a thickness of 3 mm or more but less than 4.75 mm | 5%DCS:4%CA:FreeDCT:5% | → |
| 72193300 | Of a thickness exceeding 1 mm but less than 3 mm | 5%DCS:4%CA:FreeDCT:5% | → |
| 72193400 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | 5%DCS:4%CA:FreeDCT:5% | → |
| 72193500 | Of a thickness of less than 0.5 mm | 5%DCS:4%CA:FreeDCT:5% | → |
| 72199000 | Other | 5%DCS:4%DCT:5% | → |
| 72201100 | Of a thickness of 4.75 mm or more | 5%DCS:4%DCT:5% | → |
| 72201200 | Of a thickness of less than 4.75 mm | 5%DCS:4%DCT:5% | → |
| 72202000 | Not further worked than cold-rolled (cold-reduced) | 5%DCS:4%CA:FreeDCT:5% | → |
| 72209000 | Other | 5%DCS:4%DCT:5% | → |
| 72210000 | BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL | 5%DCS:4%DCT:5% | → |
| 72221100 | Of circular cross-section | Free | → |
| 72221900 | Other | 5%DCS:4%DCT:5% | → |
| 72222000 | Bars and rods, not further worked than cold-formed or cold-finished | 5%DCS:4%DCT:5% | → |
| 72223000 | Other bars and rods | 5%DCS:4%DCT:5% | → |
| 72224000 | Angles, shapes and sections | 5%DCS:4%DCT:5% | → |
| 72230000 | WIRE OF STAINLESS STEEL | 5%DCS:4%DCT:5% | → |
| 72241000 | Ingots and other primary forms | 5%DCS:4%DCT:5% | → |
| 72249000 | Other | 5%DCS:4%DCT:5% | → |
| 72251100 | Grain-oriented | 5%DCS:4%DCT:5% | → |
| 72251900 | Other | 5%DCS:4%DCT:5% | → |
| 72253000 | Other, not further worked than hot-rolled, in coils | 5%DCS:4%DCT:5% | → |
| 72254000 | Other, not further worked than hot-rolled, not in coils | 5%DCS:4%DCT:5% | → |
| 72255000 | Other, not further worked than cold-rolled (cold-reduced) | 5%DCS:4%DCT:5% | → |
| 72259100 | Electrolytically plated or coated with zinc | 5%DCS:4%DCT:5% | → |
| 72259200 | Otherwise plated or coated with zinc | 5%DCS:4%DCT:5% | → |
| 72259900 | Other | 5%DCS:4%DCT:5% | → |
| 72261100 | Grain-oriented | 5%DCS:4%DCT:5% | → |
| 72261900 | Other | 5%DCS:4%DCT:5% | → |
| 72262000 | Of high speed steel | 5%DCS:4%DCT:5% | → |
| 72269100 | Not further worked than hot-rolled | 5%DCS:4%DCT:5% | → |
| 72269200 | Not further worked than cold-rolled (cold-reduced) | 5%DCS:4%DCT:5% | → |
| 72269900 | Other | 5%DCS:4%DCT:5% | → |
| 72271000 | Of high speed steel | Free | → |
| 72272010 | "Flattened circles" and "modified rectangles" as defined in Note 1(l) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72272020 | Goods, NSA, as follows:containing less than 0.35% of carbon;containing more than 1.2% of manganese | 5%DCS:Free | → |
| 72272090 | Other | 5%DCS:4%DCT:5% | → |
| 72279010 | Goods, as follows:of high alloy steel;"flattened circles" and "modified rectangles" as defined in Note 1(l) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72279090 | Other | 5%DCS:Free | → |
| 72281000 | Bars and rods, of high speed steel | 5%DCS:4%DCT:5% | → |
| 72282010 | "Flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72282021 | Not further worked than cold-formed or cold-finished | 5%DCS:4%DCT:5% | → |
| 72282029 | Other | 5%DCS:Free | → |
| 72282090 | Other | 5%DCS:4%DCT:5% | → |
| 72283010 | Goods, as follows:of high alloy steel;"flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72283090 | Other | 5%DCS:Free | → |
| 72284010 | Goods, as follows:of high alloy steel;"flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72284090 | Other | 5%DCS:Free | → |
| 72285000 | Other bars and rods, not further worked than cold-formed or cold-finished | 5%DCS:4%DCT:5% | → |
| 72286010 | Goods, as follows:of high alloy steel;"flattened circles" and "modified rectangles" as defined in Note 1(m) to Chapter 72 | 5%DCS:4%DCT:5% | → |
| 72286090 | Other | 5%DCS:Free | → |
| 72287000 | Angles, shapes and sections | 5%DCS:4%DCT:5% | → |
| 72288000 | Hollow drill bars and rods | 5%DCS:4%DCT:5% | → |
| 72292000 | Of silico-manganese steel | 5%DCS:4%DCT:5% | → |
| 72299010 | Of high speed steel | Free | → |
| 72299090 | Other | 5%DCS:4%DCT:5% | → |